Jump to content
GMS, SMS, and WMS User Forum

wave-current coexist model


chws
 Share

Recommended Posts

Hi there,

On pp.53~56 in the user's manual of BOUSS2D, a demonstration of wave-current interaction was showed. It stated that " a 2-D hydrodynamic model was run to provide the current field for use in the wave model simulations". In my case, i generated the current field byM2D module, which was then included in the simulation of BOUSS2D. But, it seems that the coordinate system was not consistent in these models. So, wrong solution was found. Can anybody tell me how to do that in a right way?

Link to comment
Share on other sites

  • 3 months later...
Hi there,

On pp.53~56 in the user's manual of BOUSS2D, a demonstration of wave-current interaction was showed. It stated that " a 2-D hydrodynamic model was run to provide the current field for use in the wave model simulations". In my case, i generated the current field byM2D module, which was then included in the simulation of BOUSS2D. But, it seems that the coordinate system was not consistent in these models. So, wrong solution was found. Can anybody tell me how to do that in a right way?

chws,

SI engineering units are used in BOUSS-2D calculations. I believe the solution is to change your units to SI units. To do this in SMS 10.0, select "Edit|Current Coordinates". Hope that helps.

Regards,

Todd Wood

XMS Technical Support

(801) 691-5530

support@aquaveo.com

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...