Jump to content
GMS, SMS, and WMS User Forum


John Howlett

Recommended Posts

If you are having problems getting your FESWMS model to run, you may want to consider trying the following:

  • Transform your mesh so it is close to the origin (0,0). For some reason if the x and y coordinates are large and mesh element sizes are small, FESWMS can have problems.
  • Try using the Steering Tool
  • Make sure your mesh does not have incorrect elevation values (often due to extrapolation). Try looking at the mesh in a rotated view.
  • Verify that wetting / drying is turned on in the FESWMS model control
  • Is the problem a known issue with the version of FESWMS you are using?

Keywords: ds=0, ds = 0, convergence, error

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...