mmamobile Posted July 9, 2009 Report Share Posted July 9, 2009 Does anyone have any advice as to the best method for converting a MODFLOWT simulation to something that can be directly imported into GMS? I haven't experimented with the release candidate version of GMS 7.0, but I've heard that it has the ability to read Groundwater Vistas simulations (limited to MODFLOW only?). Since GWV supports MODFLOWT and GMS does not, I'm thinking translation will not be easy. Any advice would be greatly appreciated. Thank you. Quote Link to comment Share on other sites More sharing options...
Alan Lemon Posted July 10, 2009 Report Share Posted July 10, 2009 Based on the little that I have read about MODFLOWT, it seems like you could comment out the portions of the name file that are specific to MODFLOWT and read in the simulation. What happens when you try to read it into GMS? Quote Link to comment Share on other sites More sharing options...
mmamobile Posted July 13, 2009 Author Report Share Posted July 13, 2009 I've been able, with several input file modifications, to read the .BAS file in MODFLOW-88 form. Thanks for the reply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.