Jump to content
GMS, SMS, and WMS User Forum

initial condition in M2D


rublo
 Share

Recommended Posts

  • 2 months later...
  • 2 weeks later...
Thank you for your answer.

I'm using SMS 9.2 and I would use a solution of ADCIRC for initial condition of M2D.

You can use ADCIRC solution information to provide boundary condition forcing for CMS-Flow (M2D). Some limited assistance can be found at http://xmswiki.com/xms/SMS:CMS-Flow_Graphical_Interface.

The boundary condition option desired is either "WSE-Forcing" or "WSE and Velocity-forcing". From there you would choose to "Extract (from a Regional Model)". Make sure your ADCIRC grid and solution are loaded and in the same coordinate system as your CMS-Flow (M2D) model. Once the information has been extracted and applied to the CMS-Flow boundary condition cellstrings, you should continue to set up any additional forcing and the simulation parameters.

At this time you cannot use ADCIRC simulation information to actually create an initial condition (.m2i or .h5), but I think using the ADCIRC solution as forcing for the smaller domain is the way to go.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...