lucydu Posted February 9, 2016 Report Share Posted February 9, 2016 Hi everyone, Can any of you help me with the following question please? I am a beginner of GMS modelling. I want to set up a transient modflow of trench pump testing, however I don't know how to conceptualize the trench. The trench is 100m long, 2m wide, 1m deep, with 7 observation bores locating around the trench. The water levels of trench and bores were logged for 5 hours with pumping rate 1000L/min, and I need to set up a modflow and calibrate the model. The Drain (DRN) package seems not suitable for conceptualizing the trench as the water level of trenching decreasing with time. So can I set up the trench as 5 wells with the pumping rate 200L/min each, or any other suggestions how to deal with the trench please? Thank you for any advice/suggestions in advance. Best regards, Lucy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.