Jump to content
GMS, SMS, and WMS User Forum

how to run model with femwater transient solution


pcpplg07
 Share

Recommended Posts

how i can setup time step for transient solution with FEMWATER. because i setup time control 600 days and constant 50 day . after model run finish, not result of each time step.

pornchai

Link to comment
Share on other sites

Thank you Alan


i found problem while run model. How i can fix it. Can you recommend for me.


Thank you


Pornchai Pongpanlarp


Errors and warnings generated by the GMS Model Checker:


RUN OPTIONS:

No warnings detected.

No errors detected.

MESH QUALITY:

No warnings detected.

No errors detected.

INITIAL CONDITIONS:

No warnings detected.

No errors detected.

TIME CONTROL:

No warnings detected.

No errors detected.

OUTPUT CONTROL:

No warnings detected.

No errors detected.

MATERIALS:

Warning: Kxx values between elements 2 and 177976 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 4 and 177876 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 6 and 177877 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 8 and 177868 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 10 and 177867 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 12 and 177858 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 14 and 189486 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 16 and 176188 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 18 and 176190 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 20 and 189433 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 22 and 177871 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 24 and 177872 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 26 and 177870 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 28 and 177859 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 30 and 177860 differ by more than 3 orders of magnitude.

Warning: Kxx values between elements 32 and 177861 differ by more than 3 orders of magnitude.

Link to comment
Share on other sites

Thank you

i got it already but new error show below . What happen in my model


Pornchai Pongpanlarp


------------------------------------------------------------------------


Errors and warnings generated by the GMS Model Checker:


RUN OPTIONS:

No warnings detected.

No errors detected.

MESH QUALITY:

No warnings detected.

No errors detected.

INITIAL CONDITIONS:

No warnings detected.

No errors detected.

TIME CONTROL:

No warnings detected.

No errors detected.

OUTPUT CONTROL:

No warnings detected.

No errors detected.

MATERIALS:

No warnings detected.

Error: Not enough points in unsaturated zone head series (moisture content) for material #1

Error: Not enough points in unsaturated zone head series (moisture content) for material #12

Error: Not enough points in unsaturated zone head series (moisture content) for material #3

Error: Not enough points in unsaturated zone head series (moisture content) for material #4

Error: Not enough points in unsaturated zone head series (moisture content) for material #6

Error: Not enough points in unsaturated zone head series (moisture content) for material #7

Error: Not enough points in unsaturated zone head series (moisture content) for material #5

Error: Not enough points in unsaturated zone head series (moisture content) for material #8

Error: Not enough points in unsaturated zone head series (moisture content) for material #9

Error: Not enough points in unsaturated zone head series (moisture content) for material #10

Error: Not enough points in unsaturated zone head series (moisture content) for material #11

Error: Negative or zero bulk density in material #1.

Error: Negative or zero bulk density in material #12.

Error: Negative or zero bulk density in material #3.

Error: Negative or zero bulk density in material #4.

Error: Negative or zero bulk density in material #6.

Error: Negative or zero bulk density in material #7.

Error: Negative or zero bulk density in material #5.

Error: Negative or zero bulk density in material #8.

Error: Negative or zero bulk density in material #9.

Error: Negative or zero bulk density in material #10.

Error: Negative or zero bulk density in material #11.

BOUNDARY CONDITIONS:

No warnings detected.


--------------------------------------------------------------

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...