Transform XS2D Well Detail Line Issue

[Annieb08]

Hello, I am going through the Well Construction tutorial and am having issues when I use the Transform XS2D Well Detail Line. When I go through the steps and add the information, the tool runs and populates the WellConstructionLine feature class but the features are not visible in the same extent as the borelines on the cross section. I'm not even seeing an extent in the Source tab within the properties. I have the WellConstructionLine in the same feature dataset so I'm not quite sure why this is happening. Any help would be greatly appreciated.

[Doug Gallup]

I assume you've followed the steps to symbolize the risers, after activating the data frame for the cross section? What if you start a new map, and add just the WellConstructionLine_6475 feature class, does it display? Would it be possible to attach the WellConstructionLine_6475 feature class here on the forum? Also, which version of Arc Hydro Groundwater are you running?

[Annieb08]

Hello, I am using version 3.3.0 of Arc Hydro Groundwater for ArcGIS 10.0. I am following the steps in the tutorial but I am using my own data. When I add the two feature classes (WellConstructionLine_2 and XS2D_Boreline_2) to another MXD, the same problem is displaying. The extents are off. I don't see where I can attach the geodatabase but below are the source details for both feature classes:

WellConstructionLine_2

Data Type: Shapefile Feature Class

Shapefile: C:\Users\abergmann\Documents\WellConstructionLine_2.shp

Geometry Type: Line

Projected Coordinate System: NAD_1983_StatePlane_Arizona_Central_FIPS_0202_Feet

Projection: Transverse_Mercator

False_Easting: 699998.60000000

False_Northing: 0.00000000

Central_Meridian: -111.91666667

Scale_Factor: 0.99990000

Latitude_Of_Origin: 31.00000000

Linear Unit: Foot_US

Geographic Coordinate System: GCS_North_American_1983

Datum: D_North_American_1983

Prime Meridian: Greenwich

Angular Unit: Degree

Extent:

Top: 4040.000000ft

Right: 12721.198359 ft

Left: 0.000000 ft

Bottom: 1968.140000 ft

XS2D_Boreline_2:

Data Type: Shapefile Feature Class

Shapefile: C:\Users\abergmann\Documents\XS2D_Boreline_2.shp

Geometry Type: Line

Projected Coordinate System: NAD_1983_StatePlane_Arizona_Central_FIPS_0202_Feet

Projection: Transverse_Mercator

False_Easting: 699998.60000000

False_Northing: 0.00000000

Central_Meridian: -111.91666667

Scale_Factor: 0.99990000

Latitude_Of_Origin: 31.00000000

Linear Unit: Foot_US

Geographic Coordinate System: GCS_North_American_1983

Datum: D_North_American_1983

Prime Meridian: Greenwich

Angular Unit: Degree

Extent:

Top: 22020.740000 ft

Right: 12721.198359 ft

Left: 0.000000 ft

Bottom: 17111.000000 ft

I hope this helps. Thanks!