Matt_Bilskie Posted March 1, 2013 Report Share Posted March 1, 2013 When I am in the mesh module (ADCIRC) and making mesh edits I would like to have a hot key that can automatically save the mesh (*.grd/14) and overwrite the last save (with permission). Since there is not an undo, I frequency save the mesh file and would like to eliminate the file > save as > type *.grd > ...Is there a way to currently do this as these key strokes / mouse clicks would save a lot of time!- Matt Quote Link to comment Share on other sites More sharing options...
Tom Moreland Posted March 4, 2013 Report Share Posted March 4, 2013 You can save the current project by clicking CTRL+S. This will save updates to the mesh to the current .grd file. Quote Link to comment Share on other sites More sharing options...
Matt_Bilskie Posted March 4, 2013 Author Report Share Posted March 4, 2013 I should have mentioned that I also have map data, shapefiles, and scatter sets loaded. I just want to save the *.grd, not a *.sms file. Quote Link to comment Share on other sites More sharing options...
Tom Moreland Posted March 6, 2013 Report Share Posted March 6, 2013 While there's no hotkey for this, you can select the "Save ADCIRC" command from the file menu. This will save the grid without re-saving all of the scatter data, map data, etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.