9919704 Posted December 23, 2012 Report Share Posted December 23, 2012 Hello~everyoneI have a question about setting the pumping wells for FEMWATERI use GMS 7.1. and i use Map data setting pumping well, when i use Map to FEMWATERshow the " Warning: No 3D mesh nodes lie within the screened interval of well id = 8731."how can i do? Quote Link to comment Share on other sites More sharing options...
Alan Lemon Posted January 3, 2013 Report Share Posted January 3, 2013 This means that you need to adjust the top and bottom of the well screen in the map data so that it will intersect at least one node from the 3D mesh. Quote Link to comment Share on other sites More sharing options...
9919704 Posted March 8, 2013 Author Report Share Posted March 8, 2013 Alan, Thank you for your answerIn FEMWATER, set the maximum number of pumping wells is 60?Because I set the number of pumping wells is 105. However model simulations shows "PS1 card, MAX. NUMBER OF WELLS FOR FLOW=61 > MXWNPH=60"How do I solve the problem is limited to the number of pumping wells?Thank you. Quote Link to comment Share on other sites More sharing options...
Alan Lemon Posted March 8, 2013 Report Share Posted March 8, 2013 Sounds like you will need to recompile femwater to handle more wells. Send a request to support@aquaveo.com and they will give you the source code so you can compile it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.