Jump to content
GMS, SMS, and WMS User Forum

Jeff Barry

  • Posts

  • Joined

  • Last visited

Everything posted by Jeff Barry

  1. I am interested in modeling a river that flows into a lake and to look at contaminate transport from the river into the lake and how the plume is influenced by cross shore currents and wind generated currents within the lake. I am assuming that I can ignore tides on the lake. I see how I can do bits of this - I could use RMA2 or FESWM and develop a river mesh which then expands in both depth and width as the bed and banks drop away into the lake - kind of like a very large estuary. I could set the d/s boundary to the lake level and even perhaps add a third boundary condition to the edge of the mesh to act as a tributary which would represent the cross shore currents. Run this model in RMA2, get the hydraulics and then run those through RMA 4 to see how the contaminates put in the river will enter and move about in the lake/estuary. Does this make any sense? What I would be missing is the more complex wind driven currents in the lake. Is there a way to merge RMA2 and ADCIRC. Or, should I run RMA2 with a d/s boundary at the lake/river interface and then use the output at that point as an input boundary condition to ADCIRC? Also, can ADCIRC do contaminate transport? Thanks in advance for any and all thoughts. Jeff
  2. Mike - this is certainly the blind leading the blind because I am new as well but I got the same error message and turned the bottom friction off as well. My thinking is that the bottom friction was intended for the full-plane and not the half-plane rnn of STWAVE. If others have any ideas I'd certainly like to hear as well. And thanks to those who respond to these postings. I learn alot by reading these.
  • Create New...