Jump to content
GMS, SMS, and WMS User Forum
Sign in to follow this  
Miguel Vigo

CGWave Solution File output

Recommended Posts

Hi , I'm trying to generate a program in Matlab to calculate the all parameters of the wave lineal theory ( particles´s velocity , pressures, etc in different depths ) with CGWave solution.

my problem is knowing that one row of the file means that stress in red below:

12

CGWAVE Model

139596 276996 12 35 487 500000 1 10

1 3 1 1 0 0 0

69 0.99964E-03 0.00000E+00 10

0.50 10.00 300.00000 0.00 0.12 0.15

0.1000E-02 0.1000E-03 0.5116E+06 0.4706E+07 0.2924E+00 Is this the position of any node with the depht?

-0.74913E+00 0.52630E-01 -0.74461E+00 0.44924E+00 -0.45169E+00 0.74612E+00

-0.21278E-01 0.86251E+00 0.40993E+00 0.76007E+00 0.72219E+00 0.46555E+00

0.83195E+00 0.60583E-01 0.71169E+00 -0.34069E+00 0.39989E+00 -0.62427E+00

-0.92821E-02 -0.71307E+00 -0.39903E+00 -0.59189E+00 -0.66701E+00 -0.30522E+00

-0.75045E+00 0.62341E-01 -0.63802E+00 0.41090E+00 -0.36946E+00 0.65079E+00

-0.23032E-01 0.72511E+00 0.30686E+00 0.62324E+00 0.53746E+00 0.38073E+00

0.61669E+00 0.66137E-01 0.53442E+00 -0.23843E+00 0.32580E+00 -0.45886E+00

0.54031E-01 -0.55424E+00 -0.22442E+00 -0.51976E+00 -0.45635E+00 -0.36944E+00

-0.58854E+00 -0.13752E+00 -0.59472E+00 0.12578E+00 -0.47343E+00 0.36765E+00

-0.24853E+00 0.53248E+00 0.26912E-01 0.57926E+00 0.28440E+00 0.50061E+00

0.46898E+00 0.32208E+00 0.54608E+00 0.90904E-01 0.51078E+00 -0.14646E+00

0.37289E+00 -0.34956E+00 0.15776E+00 -0.47910E+00 -0.77379E-01 -0.50175E+00

-0.27378E+00 -0.42307E+00 -0.39950E+00 -0.27352E+00 -0.44464E+00 -0.88233E-01

-0.41320E+00 0.97934E-01 -0.32146E+00 0.25526E+00 -0.19355E+00 0.36458E+00

-0.54110E-01 0.41786E+00 0.85970E-01 0.42359E+00 0.21552E+00 0.38583E+00

0.32162E+00 0.30850E+00 0.39444E+00 0.19758E+00 0.42845E+00 0.64961E-01

0.42273E+00 -0.73852E-01 0.37967E+00 -0.20493E+00 0.30394E+00 -0.31670E+00

I suppose the results are the potential in x at each node of the mesh, but each pair is written in horizontal or vertical?

Share this post


Link to post
Share on other sites

The line you are asking about is a header lines and is ignored when SMS reads the solution. The only values from the header that are read by SMS (or the CGWAVE utility TRANS) are the component attributes (height, period direction) on the line after the one you ask about.

I've asked the model developers to review your question as well.

Hi , I'm trying to generate a program in Matlab to calculate the all parameters of the wave lineal theory ( particles´s velocity , pressures, etc in different depths ) with CGWave solution.

my problem is knowing that one row of the file means that stress in red below:

12

CGWAVE Model

139596 276996 12 35 487 500000 1 10

1 3 1 1 0 0 0

69 0.99964E-03 0.00000E+00 10

0.50 10.00 300.00000 0.00 0.12 0.15

0.1000E-02 0.1000E-03 0.5116E+06 0.4706E+07 0.2924E+00 Is this the position of any node with the depht?

-0.74913E+00 0.52630E-01 -0.74461E+00 0.44924E+00 -0.45169E+00 0.74612E+00

-0.21278E-01 0.86251E+00 0.40993E+00 0.76007E+00 0.72219E+00 0.46555E+00

0.83195E+00 0.60583E-01 0.71169E+00 -0.34069E+00 0.39989E+00 -0.62427E+00

-0.92821E-02 -0.71307E+00 -0.39903E+00 -0.59189E+00 -0.66701E+00 -0.30522E+00

-0.75045E+00 0.62341E-01 -0.63802E+00 0.41090E+00 -0.36946E+00 0.65079E+00

-0.23032E-01 0.72511E+00 0.30686E+00 0.62324E+00 0.53746E+00 0.38073E+00

0.61669E+00 0.66137E-01 0.53442E+00 -0.23843E+00 0.32580E+00 -0.45886E+00

0.54031E-01 -0.55424E+00 -0.22442E+00 -0.51976E+00 -0.45635E+00 -0.36944E+00

-0.58854E+00 -0.13752E+00 -0.59472E+00 0.12578E+00 -0.47343E+00 0.36765E+00

-0.24853E+00 0.53248E+00 0.26912E-01 0.57926E+00 0.28440E+00 0.50061E+00

0.46898E+00 0.32208E+00 0.54608E+00 0.90904E-01 0.51078E+00 -0.14646E+00

0.37289E+00 -0.34956E+00 0.15776E+00 -0.47910E+00 -0.77379E-01 -0.50175E+00

-0.27378E+00 -0.42307E+00 -0.39950E+00 -0.27352E+00 -0.44464E+00 -0.88233E-01

-0.41320E+00 0.97934E-01 -0.32146E+00 0.25526E+00 -0.19355E+00 0.36458E+00

-0.54110E-01 0.41786E+00 0.85970E-01 0.42359E+00 0.21552E+00 0.38583E+00

0.32162E+00 0.30850E+00 0.39444E+00 0.19758E+00 0.42845E+00 0.64961E-01

0.42273E+00 -0.73852E-01 0.37967E+00 -0.20493E+00 0.30394E+00 -0.31670E+00

I suppose the results are the potential in x at each node of the mesh, but each pair is written in horizontal or vertical?

Share this post


Link to post
Share on other sites

The line you are asking about is a header lines and is ignored when SMS reads the solution. The only values from the header that are read by SMS (or the CGWAVE utility TRANS) are the component attributes (height, period direction) on the line after the one you ask about.

I've asked the model developers to review your question as well.

THANKS ALAN.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...