Jump to content
GMS, SMS, and WMS User Forum
piwito

HEC RAS in WMS

Recommended Posts

Hello,

I am trying to do a flood plain delineation. I am running WMS 8.0 in conjuction with HEC-RAS

(v 3.01). When I click in WMS to read HEC-RAS solution, I loose functionality of WMS. As soon as, I close HEC-RAS WMS becomes functional but no solution is read. Any help will be greatly appreciated.

Thank you,

DC

Share this post


Link to post
Share on other sites
Hello,

I am trying to do a flood plain delineation. I am running WMS 8.0 in conjuction with HEC-RAS

(v 3.01). When I click in WMS to read HEC-RAS solution, I loose functionality of WMS. As soon as, I close HEC-RAS WMS becomes functional but no solution is read. Any help will be greatly appreciated.

Thank you,

DC

DC,

I can suggest a few things right off the bat.

I would try using HEC-RAS 3.1.3: http://www.hec.usace.army.mil/software/hec...AS313_Setup.exe. I'm not familiar with HEC-RAS v3.01, but I do know that WMS 8.0 is fully compatible with HEC-RAS 3.1.3.

You also want to make sure you have the most current WMS 8.0 update: http://wms.aquaveo.com/wms80update.exe. This will make sure you have all the WMS 8.0 bug fixes.

Another thing to consider is that when you import your HEC-RAS solution, all your HEC-RAS cross-sections need to match those in WMS. This often causes problems. You should also make sure your rivers and reaches are all named the same in WMS and in RAS.

There could be a number of other things that could be wrong, but it's hard to say what without looking at your project.

Hope this helps!

-Clark

Share this post


Link to post
Share on other sites
DC,

I can suggest a few things right off the bat.

I would try using HEC-RAS 3.1.3: http://www.hec.usace.army.mil/software/hec...AS313_Setup.exe. I'm not familiar with HEC-RAS v3.01, but I do know that WMS 8.0 is fully compatible with HEC-RAS 3.1.3.

You also want to make sure you have the most current WMS 8.0 update: http://wms.aquaveo.com/wms80update.exe. This will make sure you have all the WMS 8.0 bug fixes.

Another thing to consider is that when you import your HEC-RAS solution, all your HEC-RAS cross-sections need to match those in WMS. This often causes problems. You should also make sure your rivers and reaches are all named the same in WMS and in RAS.

There could be a number of other things that could be wrong, but it's hard to say what without looking at your project.

Hope this helps!

-Clark

Will try that...

Thank you for the quick reply..

dc

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...