Jump to content
GMS, SMS, and WMS User Forum
Sign in to follow this  
Pierre WIkby

Flooding and drying problem in coastal terrain

Recommended Posts

Hi,

I have a problem regarding flooding and wetting which makes it difficult to calibrate the model. It is representing a coastal area with thin clay layers and sandy till which we assumed to be 1 m each. The two bottom layers represent rock with the upper one being fractured and thus have a higher hydraulic conductivity. The surfaces are imported from ArcMap and ranges between 30 and 0 m. constant head and no-flow was assumed.The main problem I found is that the groundwater table is almost completely flat in contrast to the terrain.

Any ideas of packages, solvers or any tips in general, of how we can tackle the issue. We are thankful for any answers that could help us!

image.thumb.png.70a7cf947964d4d3409f98ed2f8840ff.png

image.thumb.png.c72a02732ec7cd15d5376a5d04af1e29.png

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...