Jump to content
GMS, SMS, and WMS User Forum
mina.88

confused in output control

Recommended Posts

Hello all,

Using MODFLOW 2000 after the model is run I need head (groundwater level) data for each stress period in the list file. Unfortunately starting head is printed instead of head values. in the output control file (.oc) on the first and second line respectively I have written "HEAD PRINT FORMAT 2" and "HEAD SAVE UNIT 730" which I don't find them incorrect as I have used the same for another model which it’s list file had the head values correctly.

Below is a sample of incorrect values (starting head) printed to my listing file for a specific row in two different stress periods. As it is obvious, the actives cells have the same values that represent the starting head.

Stress period 220, row number 17:

      -999.000      -999.000      -999.000       1051.88       1051.36       1050.66       1049.86       1049.02       1048.36   

        1047.62       1046.65       1045.66       1044.89       1044.23       1043.44       1042.66       1042.22       1042.01   

        1041.94       1041.94       1042.02       1042.12       1042.19       1042.10       1041.91       1041.75       1041.67   

        1041.55       1041.31       1041.04       1040.83       1040.47       1039.62      -999.000      -999.000      -999.000   

       -999.000      -999.000      -999.000      -999.000      -999.000      -999.000      -999.000      -999.000      -999.000   

       -999.000      -999.000

Stress period 460, row number 17:

      -999.000      -999.000      -999.000       1051.88       1051.36       1050.66       1049.86       1049.02       1048.36   

        1047.62       1046.65       1045.66       1044.89       1044.23       1043.44       1042.66       1042.22       1042.01   

        1041.94       1041.94       1042.02       1042.12       1042.19       1042.10       1041.91       1041.75       1041.67   

        1041.55       1041.31       1041.04       1040.83       1040.47       1039.62      -999.000      -999.000      -999.000   

       -999.000      -999.000      -999.000      -999.000      -999.000      -999.000      -999.000      -999.000      -999.000   

       -999.000      -999.000

 

Any suggestions will be appreciated.

Best Regards.

Mina

 

 

Edited by mina.88

Share this post


Link to post
Share on other sites

Hi Mina,

the output control file should look like this:

HEAD PRINT FORMAT 15
HEAD SAVE FORMAT (20F10.3) LABEL
HEAD SAVE UNIT 30
COMPACT BUDGET FILES
DRAWDOWN PRINT FORMAT 14
PERIOD 1 STEP 1
     PRINT HEAD 2 6
     PRINT DRAWDOWN
     PRINT BUDGET
     SAVE BUDGET
     SAVE HEAD
 
PERIOD 1 STEP 7
     SAVE HEAD 1 3 5
     PRINT DRAWDOWN
     SAVE BUDGET

PERIOD 2 STEP 5
     PRINT HEAD
     PRINT BUDGET
     SAVE BUDGET
     SAVE HEAD

See this page for detailed input instructions.

Share this post


Link to post
Share on other sites
20 hours ago, Michal said:

Hi Mina,

the output control file should look like this:


HEAD PRINT FORMAT 15
HEAD SAVE FORMAT (20F10.3) LABEL
HEAD SAVE UNIT 30
COMPACT BUDGET FILES
DRAWDOWN PRINT FORMAT 14
PERIOD 1 STEP 1
     PRINT HEAD 2 6
     PRINT DRAWDOWN
     PRINT BUDGET
     SAVE BUDGET
     SAVE HEAD
 
PERIOD 1 STEP 7
     SAVE HEAD 1 3 5
     PRINT DRAWDOWN
     SAVE BUDGET

PERIOD 2 STEP 5
     PRINT HEAD
     PRINT BUDGET
     SAVE BUDGET
     SAVE HEAD

See this page for detailed input instructions.

Hello Dear Michal.

Thank's a lot, The problem solved.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×