Jump to content
GMS, SMS, and WMS User Forum
Andrea

STWAVE -> ADCIRC steering module

Recommended Posts

Hi everybody,

I am trying to run the STWAVE -> ADCIRC steering module, in order to calculate the

influence of the wave field on the currents during storm conditions. Within the SMS 10.1, I did not

manage to get the radiation stress file as an output from STWAVE, which should then be interpolated

into ADCIRC by the steering module itself. The STWAVE run stops and a message like this comes up:

*** Model Started

STWAVE Half Plane Version 5.6

values for ni,nj,dxinc,dyinc 472 342 50.00000

50.00000

values for nf,na,epsang,iprp 40 35 5.000000

1

nselct 1

ainc = 8.7266468E-02

inside time loop, itms = 1

caseid,u,udir,fm 1 0.0000000E+00 360.0000 5.9999999E-02

0.0000000E+00

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.03 0.13 0.46 1.24 2.65 4.58 6.43 7.39 6.96 5.37

3.39 1.73 0.71 0.23 0.06 0.01 0.00 0.00 0.00 0.00

............

............

0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00

forrtl: severe (157): Program Exception - access violation

Image PC Routine Line Source

stwave.exe 0040D5FB Unknown Unknown Unknown

Has any user ever completed a STWAVE-ADCIRC simulation via the SMS steering module? which versions were used?

Any comment would be really appreciated

Andrea

Share this post


Link to post
Share on other sites

Hi,

Do you think you could get your files to technical support so we could take a look at them?

Contact support@aquaveo.com for instructions on getting the files to them.

Cheers,

Rusty

Hi everybody,

I am trying to run the STWAVE -> ADCIRC steering module, in order to calculate the

influence of the wave field on the currents during storm conditions. Within the SMS 10.1, I did not

manage to get the radiation stress file as an output from STWAVE, which should then be interpolated

into ADCIRC by the steering module itself. The STWAVE run stops and a message like this comes up:

*** Model Started

STWAVE Half Plane Version 5.6

values for ni,nj,dxinc,dyinc 472 342 50.00000

50.00000

values for nf,na,epsang,iprp 40 35 5.000000

1

nselct 1

ainc = 8.7266468E-02

inside time loop, itms = 1

caseid,u,udir,fm 1 0.0000000E+00 360.0000 5.9999999E-02

0.0000000E+00

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.03 0.13 0.46 1.24 2.65 4.58 6.43 7.39 6.96 5.37

3.39 1.73 0.71 0.23 0.06 0.01 0.00 0.00 0.00 0.00

............

............

0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00

forrtl: severe (157): Program Exception - access violation

Image PC Routine Line Source

stwave.exe 0040D5FB Unknown Unknown Unknown

Has any user ever completed a STWAVE-ADCIRC simulation via the SMS steering module? which versions were used?

Any comment would be really appreciated

Andrea

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...