Jump to content
GMS, SMS, and WMS User Forum

aquabane

Members
  • Content Count

    1
  • Joined

  • Last visited

Everything posted by aquabane

  1. Hi everybody, Sorry for my bad english. I have a problem when i run on RMA2. The modele does not converge. I don't know where come from the error. I injected in inflow a flow and outflow a surface water elevation. I think that there is no water because the results are : ++ CONTINUITY CHECKS ... TIME STEP = 0 HOUR (TET) = 0.00000 ++ U,V,H HYDRO ITER CYCLE= 0 ++ VORTICITY ITER CYCLE= 0 ++ LINE TOTAL X-FLOW Y-FLOW % of 1st ++ 1 0.00000E+00 0.00000E+00 0.00000E+00 0.0 ++ 2 0.00000E+00 0.00000E+00 0.00000E+00 0.0 *** SS LOOP INDEX UVH/VOR PHASES - NPRBIG = 1 Using Traditional Method. IFLAG status= 1 where Flag = 1, Means no change occured WET/DRY Update Summary, Simulation hr= 0.000 Iteration= 1 Elems dried= 0 Elems rewet= 0 Nodes dried= 0 Nodes rewet= 0 --> BUFFER BLOCKS WRITTEN= 3 FINAL LQ SIZE= 3409 --> MAXIMUM FRONT WIDTH = 233 RESULTS AT THE END OF 0 TIME STEPS... TOTAL TIME = 0.000000 HOURS... ITERATION CYCLE = 1 CONVERGENCE PARAMETERS DF AVG CHG MAX CHG NODAL_LOCATION 1 305.4290 4525.8799 1188 X-VEL 2 367.6617 -3747.9221 1189 Y-VEL 3 3.5138 126.5884 1207 DEPTH ACTIVE NODAL STATISTICS FOR THIS ITERATION NODE XVEL-MAX NODE XVEL-MIN NODE YVEL-MAX NODE YVEL-MIN 1188 4525.880 1080 -4202.896 1208 2769.196 1189 -3747.922 NODE DEPTH-MAX NODE DEPTH-MIN NODE ELEV-MAX NODE ELEV-MIN AVE-ELEV NODES ACTIVE/TOTAL 1207 126.869 1357 -1.228 1207 332.938 1551 204.322 212.607 1621 / 1621 NEGATIVE DEPTH WARNING: For entire mesh= 45 For active nodes= 45 ---> Diagnostic Suggestion: Set ITRACE=-1 or 1, TR-Card. This will save a file named = r2negdepth.dat --> STOP depth convergence exceeds 50.0 Thank you for helping me
×
×
  • Create New...